 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| LB-502DN Series LED displays High efficiency, two-digit numeric displays LB-502DN Series The LB-502DN series were designed to meet the need for multi-digit numeric displays. These LED numeric displays use GaAsP on GaP for the emitting material (with the exception of green) and are housed in an epoxy resin package. They are two-digit displays with a character height of 13.0mm. External Dimensions (Unit: mm) 25.0 12.7 10 1.25 Features 1) Height of character: 13.0mm 2) Common anode and common cathode configurations are available for each color. 3) High efficiency reflectors are used to achieve a bright, clear display. 4) The package surface is painted black and the segments are colored the display color. 1.25 7.4 2-1.25 (20.32) Tolerances are 0.2 unless otherwise noted : Selection guide Emitting color Red Common Anode LB-502VD Orange LB-502DD LB-502DN Green LB-502MD LB-502MN LB-502VN Cathode Order-based production. Pin assignments 18 17 16 15 14 13 12 11 10 + + + + + + + + + a1 a2 f1 g1 e1 d1 Digit 1 D.P1 + + + + c1 e2 d2 Digit 2 D.P2 + + + b1 f2 g2 c2 b2 Pin No. 1 2 3 4 5 6 7 8 9 Function Segment "e1" Segment "d1" Segment "c1" D.P1 Segment "e2" Segment "d2" Segment "g2" Segment "c2" D.P2 Pin No. 10 11 12 13 14 15 16 17 18 Function Segment "b2" Segment "a2" Segment "f2" Digit 2 Common Digit 1 Common Segment "b1" Segment "a1" Segment "g1" Segment "f1" + Pin No. 1 + 2 3 4 5 6 7 8 9 3.5Min. 0.5 (2.54) 7.0 Rev.A 0.25 (15.24) 13.0 17.5 1/2 LB-502DN Series LED displays Internal circuit schematic (example of common anode) Dig.1 14 COM Dig.2 13 COM a1 b1 c1 d1 e1 f1 g1 D.P1 16 15 3 2 1 18 17 4 a2 b2 c2 d2 e2 f2 g2 D.P2 11 10 8 6 5 12 7 9 Absolute maximum ratings (Ta=25C) Parameter Power dissipation Power dissipation Forward current Peak forward current Reverse voltage Operating temperature Storage temperature Symbol PD PD / seg IF IFP VR Topr Tstg Red Orange Green Unit mW mW mA mA V C C LB-502VD / VN LB-502DD / DN LB-502MD / MN 960 60 20 60 5 960 60 20 60 5 -25+75 -30+85 960 60 20 60 5 Pulse width 1ms duty 1 / 5 Electrical and optical characteristics (Ta=25C) Parameter Forward voltage Reverse current Peak wavelength Spectral line half width Symbol Conditions Min. VF IR IF=10mA VR=5V IF=10mA IF=10mA - - - - Red Typ. Max. Min. 2.0 - 650 40 2.8 100 - - - - - - Orange Typ. Max. Min. 2.0 - 610 40 2.8 100 - - - - - - Green Typ. Max. 2.1 - 563 40 2.8 100 - - Unit V A nm nm P Not designed for radiation resistance. Luminous intensity Color Red P 650 Type LB-502VD LB-502VN Min. 5.6 Typ. 16 Max. - Unit mcd Orange 610 LB-502DD LB-502DN 5.6 16 - mcd Green 563 LB-502MD LB-502MN 9.0 25 - mcd Note : Measured at IF=10mA Rev.A 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of LB-502VN
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |